Lanner FX-3230, Руководство пользователя, Страница: 31 / 105

31
FX-3230 User Manual
2. Flip the PHM over to align PIN1 of
the carrier with the Cutout of the
bolster plate.
3. Flip the PHM over, with the package
land of the processor facing the
socket, carefully hold the PHM while
lowering it vertically to engage it to
the alignment pins of the bolster
plate.
4. Make sure the PHM is sitting
horizontally on the bolster plate.
5. Use a torque driver to tighten the
four nuts to 12 in-lbf into the bolster
plate
following the sequence
indicated on the heat sink (#1

#2

#3

#4).
5
2
Cutout
Alignment Pin
3
Alignment Pin
4