background image

16

Bios Settings

Chapter 4

Network Application Platforms

The Main Menu

The main BIOS setup menu is the first screen that you can 

navigate. Each main BIOS setup menu option is described 

in this chapter.
The Main BIOS setup menu screen has two main frames. The 

left frame displays all the options that can be configured. 

“Grayed-out”  options  are  configured  parameters  and 

cannot be modified. On the other hand, Options in blue 

can be modified.
The  right  frame  displays  the  key  legend.  Above  the  key 

legend is an area reserved for a text message. When an 

option  is  selected  in  the  left  frame,  it  is  highlighted  in 

white. Often a text message will accompany it.

System Language

Use this item to choose the BIOS language.

System Time/System Date

Use  this  option  to  change  the  system  time  and  date. 

Highlight System Time or System Date using the <Arrow> 

keys.  Enter  new  values  through  the  keyboard.  Press  the 

<Tab> key or the <Arrow> keys to move between fields. 

The date must be entered in MM/DD/YY format. The time 

is entered in HH:MM:SS format.

Содержание FW-7571











































Отзывы: