EAI-I130 User Manual
27
This system features one M.2 B-Key slot for a 5G module card, supporting a dual SIM design. 5G module will
require four antennas. Please follow the procedures for the installation of the 5G module card.
1. Power off the system, turn the system around,
and open the bottom chassis cover.
2. Locate the M.2 B-Key slot on the motherboard.
3. Next, thermal pad placement. Remove the
protective film on the thermal pad (included in
accessory pack) and gently place on the
motherboard. The thermal pad needs to be
underneath the module card.
4. Align the notch of the 5G module card with the
socket key in the pin slot.
5. Insert the 5G module card pins at 30 degrees
into the socket until it is fully seated.
6. Push down on the module card and secure it
with one screw.
Notch
