12
2.2 Boot-up
Conditions
Once the FW-3600 console port is connected to a console PC, there will be two choices
available mid-way during the FW-3600 system boot up:
1 Enter OS (default):
“1”
allows access into FW-3600 OS and runs the firewall
2 Enter Redboot:
“2”
allows entry to Redboot for downloading of boot code / OS from
another PC via TFTP protocol.
The following figure shows the screen after choosing the option
“1”
.
After the OS completes boot up process, you can now open a browser from a connected PC to
view the Configuration Wizard that allows you to setup and configure your system. Enter the
following address on your browser to launch the Configuration Wizard:
Follow the onscreen instructions to complete the process. Configure the WAN port type as
static and using the default settings.
