manualshive.com logo in svg

Lanner electronics EM-566 Series, Руководство пользователя, Страница: 33 / 59

Поделиться
Скачать
Lanner electronics EM-566 Series Скачать руководство пользователя страница 33

 AMI BIOS SETUP

 

 

~ 29 ~ 

 

Initial Display Mode: 

Set this option to Silent to enable the AMIBIOS SilentBoot feature. This 

option specifies the initial display mode when the system boots. The settings are: 

Setting 

Description 

BIOS 

The standard BIOS boot messages displayed before booting the 

system will appear on the system monitor. 

Silent 

The standard messages will not appear on the system monitor 

and the system will boot to the operating system immediately. 

Only BIOS error messages will appear. 

 

Display Mode at Add-On ROM Init: 

This option specifies the system display mode that is set at 

the time that AMIBIOS POST initializes an optional adapter ROM. The settings are: 

Setting 

Description 

Force BIOS  The display mode currently being used by AMIBIOS is used. 

Keep Current  The current display mode is used. 

 

Hard Disk Access Control: 

This option specifies the read/write access that is set when booting 

from a  hard disk drive. The settings are Read/Write or Read-Only. The Optimal and Fail-Safe 

default settings are Read/Write. 

 

S.M.A.R.T. for Hard Disks :

 This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis 

& Reporting Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your 

disk status to predict hard disk failure. This gives you an opportunity to move data to a safe place 

before the hard disk becomes offline. Settings: Enabled and Disabled. 

   

BootUp Num-Lock : 

Set this option to 

Off

 to turn the Num Lock key off when the computer is 

booted so you can use the arrow keys on both the numeric keypad and the keyboard.  The 

settings are 

On

 or 

Off

.  The default setting is 

On

. 

 

PS/2 Mouse Support : 

When this option is set 

Enabled

, AMIBIOS supports a PS/2 type mouse.  

The settings are 

Enabled 

or 

Disabled

.  The default setting is 

Disabled

.  System Boot Up 

Sequence.

 

 

Password Check : 

This option enables password checking every time the computer is powered 

on or every time WINBIOS Setup is executed.  If 

Always

 is chosen, a user password prompt 

appears every time the computer is turned on.  If 

Setup

 is chosen, the password prompt 

appears if WINBIOS is executed.  The Optimal and Power-On defaults are 

Setup

. 

 

 

L1 Cache: 

The option enabled or disabled the internal cache memory in the processor. 

Содержание EM-566 Series




























































Отзывы:

Нет отзывов