AWARD BIOS SETUP
~30~
Doze Mode:
Options are from “1 Min” to “1 Hour” and “Disable”. The system speed will
change from turbo to slow and the video signal will be suspended, if no Power Management
events occur for a specified length of time. Full power function will return when a Wake-Up
event is detected.
Standby Mode:
Options are from “1 Min” to “1 Hour” and “Disable”. The system speed will
change from turbo to slow and the video signal will be suspended, if no Power Management
events occur for a specified length of time. Full power function will return when a Wake-Up
event is detected.
HDD Power Down:
Options are from “1 Min”. to “15 Min”. and “Disable”. The IDE hard
drive will spin down if it is not accessed within a specified length of time.
MODEM Use IRQ:
This field name interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
Throttle Duty Cycle:
When the system enters Doze mode, the CPU clock runs only part of
the time. You may select the percent of time that the clock runs.
IRQ1~IRQ15:
These fields are designed for selected peripherals, e.g. Keyboard, COM2,
COM1, LPT2, Floppy Drive, etc … You can set it to either “ON” or “OFF” fields to activate
or deactivate these peripherals.
After you have made your selection in the POWER MANAGEMENT SETUP, press the
<ESC> key to go back to the main program screen.
