V2001 Phone User Manual
-20-
5.2 SAR Notice
THIS CELLPHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission
limits for exposure to radio-frequency (RF) energy.
These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. These guidelines include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for cellphones employs a unit of
measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by public authorities such as the
Federal Communications Commission of the US
Government (FCC), or by Industry Canada, is 1.6 W/kg
averaged over 1 gram of body tissue. Tests for SAR are
conducted using standard operating positions with the
cellphone transmitting at its highest certified power level
in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the cellphone while
operating can be well below the maximum value. This is
because the cellphone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless
base station antenna, the lower the power output of the
cellphone.
Before a cellphone model is available for sale to the public,
compliance with national regulations and standards must
be shown.
The highest SAR value for this model cellphone when
tested for use at the ear is 0.77 W/Kg @ 1 gram and when
properly worn on the body is 1.50 W/Kg @ 1 gram.
