22
flammable materials as there is a real risk of fire.
7. Contact with liquid: Do not expose the phone to liquid or
touch it with wet hands: any damage caused by water may be
irreparable.
8. Use only LANIX-approved accessories. The use of
unauthorized accessories may damage your phone or cause a
safety risk.
9. Do not destroy the batteries and chargers. Never use a battery
or charger that has been damaged. Keep batteries away from
magnetic objects as the latter might cause short-circuit between
the positive and negative terminals of your batteries and destroy
the battery or phone permanently. As a general rule, you should
not expose the batteries to very high or low temperatures (below
0°C or above 45°C). Differences in temperature may reduce
battery autonomy and service life.
10. Shocks and impact: Handle and use your phone with the
utmost care. Protect your phone: shocks and impact may damage
it. Some parts of your phone are made from glass and might
break if the phone is dropped or is subject to severe impact.
Avoid dropping your phone. Do not touch the screen with sharp
objects.
11. Electric shock: Do not try to dismantle your phone as there is
a very real risk of electric shock.
12. Maintenance: If you want to clean your handset, use a dry
cloth (do not use a solvent, such as benzene, or alcohol).
13. Recharge your phone in a well-ventilated area. Do not
recharge your device when it is resting on a soft surface.
14. Damage to magnetic strips: Keep your phone away from
credit cards as they may damage the data on the magnetic strips.
15. Do not use the mobile phone in the environment at too high
or too low temperature, never expose the mobile phone under
strong sunshine or too wet environment. The suitable
temperature for the phone is -10°c to +45°c, the maximum
charging temperature declared by the manufacturer is +40°c.
16. Due to the used enclosure material, the GSM mobile phone
shall only be connected to a USB Interface of version 2.0 or
higher. The connection to so called power USB is prohibited.
17. The power adapter is the disconnect device for this
equipment. The socket-outlet shall be near the equipment and
