Lanier 5722 Скачать руководство пользователя

Страница: 29 / 173

Press the PROGRAM key on the display

panel.

Copying in the Single-Feed Mode

Press the ADF key.

Press the SADF key on the panel to select

single feeding.

●

SADF is highlighted and selected.

●

The touch panel returns to the original display.

Select the desired copy size, reproduction

ratio, image density level and copy quantity.

●

The automatic paper selection mode is
selected as the default mode.

Align the slides on the original feed tray

to the size of the original.

●

Set the slides a little wider than the actual
original width.

Slides

Insert the original.

●

Place the original face up and insert it in
straight along the slides.

●

When the original starts being pulled in
automatically, let go of the original.
The original is automatically copied.

4. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER (OPTIONAL)(Cont.)

Содержание 5722














































































































































































Результаты поиска

Содержание 5722

Отзывы:

Похожие инструкции для 5722

Бренды по названию

Популярные бренды

Lanier 5722, Руководство оператора

Результаты поиска

Содержание 5722

Отзывы:

Похожие инструкции для 5722

Бренды по названию

Популярные бренды