Lanier 5415MFD, Руководство оператора

Страница: 91 / 258

Relay Initiate
Function Utilities 5 - 17
Relay Initiate
Relay TX allows the operator to make one long distance call to a remote unit and the remote unit
will relay the message to one or more fax units in the local area. With this function, you can save
valuable time and telephone charges. This function can also instruct the remote fax machine to
send an TX Result report to one of its Speed Dial locations.
The following conditions must be met for Relay Initiate function:
•
The fax on the receiving party is either Lanier 5415, 12XX, or 20XX.
•
The receiving party must register the One Touch key or Group dial key for relay
function.
•
The receiving party must register one Speed Dial for send report.
Using Relay Initiate
1
Place the original document in the Document Feeding Tray.
2
Press the "Function" key.
3
Press ‘7’ to select “RELAY INITIATE TX”. A message appears confirming the selection.
4
Select a “One-Touch” key that registered as the remote fax unit (Relay station).
The name or telephone number associated with this One-Touch key appears to confirm this
is the location you intended to poll.
5
Press "Yes" key to accept this selection.
The display prompts the message to ask you the relay group number registered in the Initial
station.
6
Use the Keypad to input the two digit One-Touch number in the remote fax machine that
represents the end locations to which you wish to transmit.You can set 01-64.
7
Press the "Yes" key.
The display prompts the message to ask you the Speed Dial number (registered in the relay
station) for where to send the TX result report.
8
Use the Keypad to input the two digit Speed Dial number that should receive the TX
Results Report.You can set 00-99.
9
Press "Yes" key to begin transmitting. Your document is scanned into memory and sent to
the Relay station.
Note: If the Relay Group No. at remote unit is not registered, it will send a error
report according to the speed Dial No. setting at remote unit. If the speed Dial No.
at remote unit is not registered no reports will be generated.