LanguageTeacher ®
model EY200D
8
•
Take out the old batteries and put in new ones.
♦
Note:
Make sure to place both batteries so that the
plus signs (+) are on top.
•
Secure the batteries in place with the metallic brace.
•
Put back the battery compartment cover by sliding it
toward the unit. Make sure the cover sits in place
properly.
♦
Note:
You have 2 minutes to replace the batteries
without risk of losing data stored in RAM.
Do not
exceed the 2 min. limit! Neither manufacturer nor
dealer may be held responsible for the loss of
user’s data
.
♦
Note:
Never try to remove batteries from the
translator when the power is on. This can seriously
damage the device. If you experience difficulty
turning the unit off, press the RESET button located
on the back near the battery compartment cover to
reinitialize the system.
During a system reset, press N at the prompt
<CLEAR DATA? Y/N>
or <ERROR! CLEAR? Y/N>
to attempt preserving user’s data and the customized
system configuration. However, if RAM has been
corrupted, or if you turn the dictionary on for the first
time, you will have to press Y to reinitialize the
system.
