Langmatz basic plus EK523, Руководство по эксплуатации

Страница: 18 / 28

18
9.5 Aligning the tactile pedestrian crossing symbol
The pedestrian signal requesting device
is factory-fitted with a tactile pedestrian
crossing symbol
(1) .
Proceed as follows if the specified
direction of the tactile pedestrian
crossing symbol does not match the
direction required.
Fig. 16
•
Insert the special key (1) behind the
crossing symbol and press down.
•
The brackets (2) are opened.
Fig. 17
•
Press the tactile pedestrian crossing
symbol (2) in slightly and click it out of
place.
•
Turn the tactile pedestrian crossing
symbol in the required direction.
Note: The fitted spring must not fall
out!
•
Remove the special key (1) .
•
Release the tactile pedestrian
crossing symbol and click it back into
place.
Note: Check the built-in seal for
correct fit.
Fig. 18
1
1
2
2
1