Langmatz basic plus EK523, Руководство по эксплуатации

Страница: 11 / 28

11
6.4 Signal requesting
Signal request by vibrating push-button
•
The switching output is factory-configured as a normally open contact and can be
changed by switch
S1.5 to normally closed (see
Fig. 5
and Fig. 6).
Designation Core
Vibrating push-button 6 / 7 Potential-free switching output
Contact types NC / NO
Switching voltage max. 265 V
Switching current max. 80 mA
Signal request by touch sensor (version 1)
•
The switching output is factory-configured as a normally open contact and can be
changed by switch
S1.4 to normally closed (see
Fig. 5
and Fig. 6).
This requires a 12-volt DC supply from the soundguide EK598 to
terminals 15 and 16.
Designation Core
Large-surface sensor 8 / 10 Potential-free switching output
Contact types NC / NO
Switching voltage max. 265 V AC/DC
Switching current max. 80 mA
6.4.2.1 Signal request by push-button (version 2)
•
The switching output is factory-configured as a normally open contact and can be
changed by switch
S1.4 to normally closed (see
Fig. 5
and Fig. 6).
This requires a 12-volt DC supply from the soundguide EK598 to terminals 15 and 16.
Designation Core
Large-surface push-button 8 / 10 Potential-free switching output
Contact types NC / NO
Switching voltage max. 265 V AC/DC
Switching current max. 80 mA