Step 9.
Step 10.
Fixing Instructions
1. Hold the cabinet against the wall in its
desired location. Check that the cabinet is
straight and level using a spirit level. Open the
door and mark the wall through the holes in
the back of the cabinet with a pencil.
2. Using a 6.5mm masonry drill, drill the holes
in the marked positions to a depth of 35mm
and insert the wall plugs into the holes in the
wall.
3. Insert the wall plugs to the surface of the
wall. If fitting to a tiled surface, the wall plugs
should be inserted below the surface of the
tile to avoid cracking.
4. Hold the cabinet against the wall and align
the holes in the back of the cabinet with the
wall plugs. Insert the mounting screws and
washers through the holes in the back of
the cabinet and screw into the wall plugs to
complete the installation.
Please remove protective film from
the double sided sticky tape before
fitting the mounting plate. Ensure
the holes are aligned and fit the
mounting plates into the corners of
the cabinet.
F(x4)
H(x4) L(x4)
G(x4)
