Langer FLS 106 IC, Руководство пользователя

Страница: 46 / 79

- 46 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
mail@langer-emv.de
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Connecting a Computer 14.6
Use a USB 2.0 type A/B cable (fully rated, Hi speed, maximum length of 2 meters) to connect the
scanner to a computer. Connect the USB type A plug to the PC and the USB type B plug to the
USB type B port (Figure 50) on the FLS 106 scanner's control panel.
Figure 50: Connecting the USB type B plug to the scanner's USB type B port
Connecting a Measuring Device for Near-Field Scans by Taking a 14.7
Spectrum Analyzer as an Example
To connect a spectrum analyzer to the FLS 106 scanner, one end of the corresponding measuring
cable is connected to the spectrum analyzer's RF input and the other end (SMA plug) to the
"RF out" SMA connector on the FLS 106 control panel (Figure 51).
Figure 51: Connecting the measuring cable with SMA plug to the scanner's "RF out" port
Please refer to the annex of the ChipScan-Scanner software user manual or the www.langer-
emv.de website for a list of measuring devices supported by the ChipScan-Scanner software
1
.
1
www.langer-emv.com/fileadmin/ChipScan-ESA%20Supported%20Spectrum%20Analyzers.pdf