- 45 / 79 -
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.de
FLS 106 IC set / FLS 106 PCB set
Installation of the Digital DM-CAM Microscope Camera on the
14.4
FLS 106 PCB
Figure 45: Digital DM-CAM microscope camera
Figure 46: KA 220 camera arm
Mount the DM-CAM on the KA 220 camera arm (Figure 47) with the FLS 106 PCB. Insert the
DM-CAM into the opening of the camera screw located on the camera arm and fix with the small,
silver-coloured knurled screw.
Figure 47: Digital DM-CAM microscope camera installed
on the KA 220 camera arm
Figure 48: Connecting the HR10 plug of the DM-CAM to
the "Camera“ connector on the Z-axis tower
Then connect the HR10 plug of the DM-CAM connecting cable to the "Camera" connector on the
Z-axis tower of the FLS 106 PCB (Figure 48).
Connecting the C13/C14 Device Lead
14.5
Connect the power supply via the C13/C14 device lead (Figure 49).
Figure 49: C13 socket on the scanner
