Langer & Laumann TSG Sinus Drive, Инструкция по установке

Страница: 17 / 27

17 / 27
8 Electrical connection and startup
1. The electrical connection is via the supplied cable (see Abb. 8: / page 16)
2. If the rotation direction of the TSG Sinus Drive to be wrong direction, only the polarity of the motor
must be replaced.
WARNING:
When operating electrical equipment, certain parts of the devices conduct dangerous voltage.
Ignoring the safety instructions can result in serious personal injury or property damage! The
warnings in this instruction must be followed. During commissioning of the TSG door move-
ments cannot always be influenced from the outside. During start-up is by an authorized per-
son, which is located on the door to ensure that no other person may enter the vicinity of the door. The al-
lowable forces and energies are to be checked after commissioning at the door by the executive personnel.