3
A data plate is located on the side of the control box.
The voltage, wattage, serial number, wire size, and clearance specifications are on the data plate.
This information should be carefully read and understood before proceeding with the installation.
ELECTRICAL CONNECTION
The electrical connection must be made in accordance with local codes or in the absence of local
codes with NFPA No. 70 latest edition (in Canada use: CSA STD. C22.1)
The electrical service entrance is provided by a cord and plug located at the rear of the control
box.
The plug is a NEMA 50P. The receptacle must be supplied by the installer and is a NEMA
6-50R.
Supply wire size must be large enough to carry the amperage load for the number of Stock Pot
Ranges being installed.
The Stock Pot Range data plate is located on the side of the control box.
Wire size information can be found on the Stock Pot Range.
WARNING
ELECTRICAL GROUNDING INSTRUCTIONS
THIS APPLIANCE IS EQUIPPED WITH A 3-PRONG (GROUNDING) PLUG FOR YOUR
PROTECTION AGAINST SHOCK HAZARD AND MUST BE PLUGGED DIRECTLY INTO
A PROPERLY GROUNDED 3-PRONG RECEPTACLE.
DO NOT CUT OR REMOVE THIS GROUNDING PRONG FROM THE PLUG
.
ELECTRICAL SPECIFICATION
MODEL
VOLT
WATT
AMPS
WIRE
SR-18-8-
T
208
8,000
38.5
8
