Assembly
30.11.12
37
Remove Transport Locking
1. Dismount the transport locking.
1
Transport locking (red bracket)
6.9 Basic Operations
Observe the following operation sequence to mount
the positioning system and customer equipment:
1. Clean the mounting surface before assembly.
2. Start tightening with centrally located screw
joints, tighten the outer screw joints at last.
6.10 Fixing the Positioning System
Bolt down the positioning system along its M4, M5 or
M6 counterbores at the slide of the Y - axis.
6.11 Fixing Customer Equipment
Use the T-slots (DIN650) at the slide of the X - axis for
fixing customer equipment.
