background image

              

         

IMPORTANT SAFETY NOTICE

Dear customer,

Thank you for choosing the ET-PFD350 projector frame for Panasonic DLP® projectors.
This instruction booklet provides you with all the necessary operating information that you may
require. It will help you to get the best performance out of this new product. We hope you
will be pleased with your Panasonic projector frame.

Model number:  

ET-PFD350

WARNING

Installation work should only be carried out by a qualified technician.

- If this product is not installed correctly, serious accidents may result.

Do not place the projector (with or without frame) on top of unstable surfaces.

If the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over

and injury or damage could result.

Make sure not to exceed max. weight loads for ceiling mounts.

- For suspended installations, use only designated hanging
accessories, like

 ET-PFD550TMS2 

for a max. weight load of 150 kg (330.69 lbs).

CAUTION

Do not install the frame in a place which may impede projector ventilation.

If this is not observed, fire may result.

-For detailed information regarding positioning please consult the projector manual.

Do not set up the projector in humid or dusty places or in places where the projector may
come into contact with oily smoke or steam.

Using the projector under such conditions may result in fire, electric shocks or plastic deterioration.

Minimum 2 people are required to install the frame.

-With regard to the overall weight of all necessary installation devices, make sure to
handle those with at least 2 people.

2.

Содержание ET-PFD350












Отзывы: