P
URPLE
O
VEN
P
ROGRAMMING
EHS-C, ECCO-C, and
GCCO-C
P
ROGRAMMING
I
NSTRUCTIONS
ACTION
DISPLAY
Turn the power switch on. If the oven is already on, turn it off and then back
on.
enter
Quickly enter access code
“R/C, 1, 6, 2, 7, 3, 8”.
Do not hold the
R/C
button.
prod
Select a Product number from
0-9
.
St: 00
Select amount of time that product should steam. If no steam is required
press the shelf “A” button to advance to the next step.
Note:
If oven CPU is not strapped for steam then this step will not be provided.
000
°
F
Select a Temperature from
150
°
F-450
°
F
.
NOTE: Entering
“000”
will erase the existing program.
CC0-7
Select the desired cooking curve from 0-7.
Fano12
Enter a desired Fan setting.
“
0
” (
nofan
)
Will make fan pulse with the heat.
“
1
” (
fanonhi
)
Will make fan run on high continuously.
“
2
” (
fanonlo
)
Will make fan run on low continuously. (
2 spd. fan units ONLY
)
00: 00: 00
Enter the desired cooking time (hours : minutes : seconds)
000
°
f
The program is now entered for a single tier program, press the
“E”
button
to continue programming other products. If the program is a multi tiered
program continue by programming the next tiers. When complete press the
“E”
button.
prod
When the programs have been completely entered press the
“R/C”
button to
save and exit the programming cycle.
enter
Page 4 of 4
Purple Programming.doc
