![background image](http://html1.mh-extra.com/html/lang/csg24/csg24_installation-and-maintenance-instructions-manual_3557375007.webp)
7
3. UNPACKING
3.1 Receiving the Clamshell®
Upon receipt, check for freight damage, both visible and concealed. Visible damage should be noted
on the freight bill at the time of delivery and signed by the carrier's agent. Concealed loss or damage
means loss or damage which does not become apparent until the merchandise has been unpacked. If
concealed loss or damage is discovered upon unpacking, make a written request for inspection by the
carrier's agent within 15 days of delivery. All packing material should be kept for inspection.
Do not
return damaged merchandise to Star Manufacturing International. File your claim with the
carrier.
3.2 Location
Prior to un-crating, move the Clamshell® as near to its intended location as practical. The crating will
help protect the unit from physical damage normally associated with moving it through hallways and
doorways.
NOTICE:
If the Clamshell® is to be attached to a griddle/ charbroiler in the field –
it is recommended to complete the installation of mounting adapter
before un-crating the Clamshell®.
3.3 Un-crating the Add-on Clamshell® Hood
If Clamshell® is received already attached to a Griddle/Charbroiler skip to section 3.4.
The Clamshell® will arrive completely assembled inside a wood frame covered by a cardboard box
and bolted to a skid.
R
emove the cardboard cover, unbolt Clamshell® from the support
brackets. Discard the skid and brackets.
Remove Clamshell® from skid and place in intended location.
There are several parts that are not installed in the unit. Be careful not to misplace the following parts
when un-crating the unit.
Inner Component Cover
Outer Component Cover
Inner Flue
Outer Flue
Insulation
Manual Shut-off Valve
Two 3/8 X 16 Nuts
Note: See Mounting Adapter kit for instructions on installing these parts.
CAUTION:
UNIT IS EXTREMELY HEAVY. FOR SAFE HANDLING, INSTALLER
SHOULD OBTAIN HELP AS NEEDED, OR EMPLOY APPROPRIATE
MATERIALS HANDLING EQUIPMENT (SUCH AS A FORKLIFT, DOLLY,
OR PALLET JACK) TO REMOVE THE UNIT FROM THE SKID AND MOVE
IT TO THE PLACE OF INSTALLATION.
3.4 Un-crating Griddle/Charbroiler with Clamshell® Attached
CAUTION:
SHIPPING STRAPS ARE UNDER TENSION AND CAN SNAP BACK
WHEN CUT.
The griddle will arrive completely assembled inside a wood frame covered by a cardboard box and
strapped to a skid.
R
emove the cardboard cover, cut the straps and remove the wood
frame.
Remove griddle from skid and place in intended location. The legs and gas regulator are located in the
grease drawer.
Содержание CSG24
Страница 23: ......