14
6.3 PROGRAMMING THE CUP FILL LEVEL
If the selected button is pressed longer than 3sec the machine starts to
memorize the fill level in CUP FILLING MODE. Pressing again the selected
button will stop the filling and memorize the cup fill level. The next cup filling
will stop at the memorized fill level. A maximum of 200ml can be filled when
using a cup.
The machine stops when the clean jar is full or the cup has reached the de-
sired fill level.
While the machine is processing, the machine operation can be canceled by
pressing the selected processing button or the power button
at any
time.
CAUTION: HOT SURFACES AND BEVERAGE
When processing hot water, the water in the clean water jar or in the cup
can become very hot. Care must be taken when removing the jar or the cup
to avoid hot water spillage. Use the handle on the clean water jar when re-
moving the jar and avoid touching the hot water, otherwise severe scalding
may occur.
7
CHANGING FILTERS
The standard life time of the filters is two years. After two years have ex-
pired, the machine will issue the warning “CHANGE FILTERS” during pro-
cessing. The user must now change the filters. After changing the filters,
the “FILL FILTER” procedure must be executed as described below in the
maintenance section.
