15
MAINTENANCE & CLEANING Cont’d
PILOT BURNER ADJUSTMENT
Pilot flame adjustment is accomplished at the brass tube fitting on the main
manifold.
The brass fitting located between the regulator and the solenoid valve which has the
1/8 inch tube connected to it is the adjuster.
Turn the hex head screw clockwise to shorten the pilot flame, and counterclockwise
to lengthen the pilot flame.
•
The pilot must light the main burner within 5 seconds of gas being available at
the burner tiles (listen for the solenoid valve to open).
•
The pilot must light the main burner without snuffing itself out.
•
The pilot must continue to burn during an extended continuos operation of the
main burner.
RACK SWITCH ADJUSTMENT
The rack switch is located at the extreme right of the control compartment.
The Tilting Product Rack should energize the tilt switch at the mid-point in its travel.
To adjust the switch, bend the actuator arm.
Содержание 236CM
Страница 19: ......