5
EQUIPMENT DESCRIPTION
Exterior Construction
Griddle
The griddle dimensions are 7” (43.8cm) High, 30” (76.20cm) Deep, and width is dependent on the
actual model number.
The Sides, Bottom, and Rear wall are constructed of double wall stainless steel, which allows closer
installation to combustible surfaces.
The griddle surface is made of ” thick, highly polished steel to reduce hot and cold spots, recovery
problems, warping, and ensure even heat to the edges of the griddle.
TH Hood
Clamshell® Hood dimensions (including griddle and legs) are 22¼” (55.88cm) high with hood lowered,
(44¾” [3.67cm] high with hood raised, 3½” (80cm) deep, x 24” (6cm) wide.
The hood wrap is constructed of stainless steel.
There is a 3” clearance between griddle and hood.
Controls
Griddle
Each twelve-inch section has a manual thermostat with a temperature range of 75°F to 450°F in 50°
increments.
The thermostat is mounted in a fully enclosed, air-cooled compartment for protection from heat and
grease.
Each thermostat has a pilot light indicating when heating elements are energized. Light shuts off when
griddle reaches set temperature.
TH Hood
The TH Hood has an “on/off” toggle switch located in the griddle base control area that energizes the
heater. A tilt switch is integrated in the top of the hood that activates the heater to “full on” when lowered,
standby when raised.
An “on/off” heat indicator lamp is located next to the “on/off” toggle switch.
Griddle Surface
Gutter
Grease Pan
Section Temp Dial
Hood “on/off” Switch
Hood Indicator light
Section Pilot Light
Electric Hood
IL1561