Laney Richer Bass RB1, Руководство пользователя

Страница: 6 / 8

1 2 3 4 5 6 7 8 9 10 11
Input socket for connection of bass guitars. The socket will accommodate High or Low output basses, either Active or Passive.
Engages and disengages the on-board compressor, this compresses the input-signal giving a punchier sound. In association with the
compressor is an LED to indicate when the compressor is active. The amount of compression is controlled by the Gain control
The higher the setting the more compression. With most guitars compression will begin at about 5-6 on the control. It is possible
to have the compressor engaged but it only be active during certain periods of playing - typically the most dynamic sections.
This control is used to set the level of gain present in the pre-amp. The higher the level of gain, the more the signal will clip
producing distortion. The Gain control should be used in conjunction with the Volume control to produce the desired signal
characteristics.
Controls the boost and cut of the low-frequency response of the pre-amplifier.
Controls the boost and cut of the mid-frequency response of the pre-amplifier.
Controls the boost and cut of the high-frequency response of the pre-amplifier.
Sets the overall listening level of the amplifier.
Stereo jack socket provided for connecting an external sound source such as; CD players, MP3 players, Minidisc etc.
Socket for connecting headphones, With headphones connected, the internal loudspeaker is automatically switched off.
Indicates power is connected and the amp is switched on. (Always switch off and disconnect power cord when not in use)
Main power on/off switch
3
7
1
Page 6 /8 Page 7 /8
2
3
4
FRONT PANEL CONTROLS
Laney
OPERATING INSTRUCTIONS
Laney
OPERATING INSTRUCTIONS
5
6
7
8
9
10
11
1
2
1
2
Power inlet socket. Connect to your power source. Make sure the specified voltage is correct for your country!
Serial Number and model of your unit.
REAR PANEL CONTROLS
BLOCK DIAGRAM
INTERNAL
LOUDSPEAKER
GAIN
INPUT
VOLUME
CD In
Headphones
ACTIVE
EQ SECTION
COMPRESSOR
SECTION
POWER
AMP
SAMPLE SYSTEM