Laney
2
H
LX
1
0R
8
8
2
H
LX
1
0R
9
9
Laney
General Notes
Amplifier connection:
In order to avoid damage,
it is advisable to establish
and follow a pattern for
turning
on and off your equipment.
With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc. BEFORE turning on
your guitar amplifier.
Many products have large transient surges at turn on and off which can cause damage to your speakers. By turning on your guitar
amplifier LAST and making sure its Volume controls are set to minimum any transients from other equipment will not reach your
loudspeakers. Wait until all system parts have stabilised; usually a couple of seconds. Similarly when turning off your system always turn
down the Volume controls on your guitar amplifier and then turn off its power before turning off other equipment.
Servicing:
The user should not attempt to service these products. Refer all servicing to qualified service personnel.
Caution:
These professional loudspeaker
systems are capable of generating very high sound pressure levels.
Use care with placement and operation to avoid exposure to excessive levels that can
cause permanent hearing damage.
Cables:
never use shielded or microphone cable for any speaker
connections as this will not be substantial enough to handle the
amplifier load and could cause damage to your amplifier system.
SAMPLE SETTINGS
FX Controller
Input
Output
