Laney Black Country Customs LA-STUDIO, Руководство пользователя

Страница: 6 / 20

Page 5
LA-STUDIO REAR PANEL
• GROUND LINK
o
The ground link switch will isolate the ground on the LA-STUDIO should you encounter
any ground noise/Ground Loops from any other equipment you have connected via the
XLR out.
• XLR BALANCED OUTPUT
o
The balanced output XLR jack is a direct output from Two notes Torpedo Embedded. By
connecting this output to front of house or an audio interface you can
capture LA-
STUDIO’s tone with no need for a cabinet or microphone .
o
To run the output of the LA-STUDIO to an external device, connect to
your audio interface or PA with a good quality XLR cable. Set the
amplifier up the way you intend to play, (EQ, volume) and then adjust
the output of the balanced out using the LEVEL control.
o
Set the parameters of the audio interface/PA to get your desired sound.
• HEADPHONE SOCKET
o
The headphone jack on the LA-STUDIO comes directly from the Two notes output! This
allows you to use the amplifier with any of the selected virtual cabinet settings through
your headphones. By utilizing the built-in reactive load, you can play the amp with no
speaker using only the headphone jack as the output for quiet playing and silent
recording.
•
VIRTUAL CABINET SELECTOR
o
This 6-position selector switch lets you to select which of the first 6 Two notes presets is
active on the XLR out. See
TWO NOTES TORPEDO
• LEVEL
o
Sets the level of signal sent to an external device connected to the XLR balanced output
and to the headphone output.
•
PEAK INDICATOR
o
Shows when the output from the Two notes Torpedo Embedded is clipping. If the PEAK
indicator lights up it is recommended that you back off the LEVEL control until the PEAK
indicator is no longer illuminating.