Page 8 /12
Laney
OPERATING INSTRUCTIONS
Line In
GAIN
Channel 1
VOLUME
D.I.
EQ SECTION
POWER
AMP
Channel 2
GAIN
Reverb
VOLUME
Remote
Line In
Mic
CD
Your AH50 features a kick style design to enable you to use it as a stage monitor, or a conventional straight combo.
Page 9 /12
OTHER FEATURES
SAMPLE SYSTEM
BLOCK DIAGRAM
Laney
OPERATING INSTRUCTIONS
General Notes
Amplifier connection:
In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your
equipment. With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc.
BEFORE turning on your AUDIOHUB. Many products have large transient surges at turn on and off which can cause damage to
your speakers. By turning on your AUDIOHUB LAST and making sure its Volume control is set to minimum any transients from
other equipment will not reach your loudspeakers. Wait until all system parts have stabilised; usually a couple of seconds. Similarly
when turning off your system always turn down the Volume control on your AUDIOHUB and then turn off its power before
turning off other equipment.
Caution:
These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with
placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage. (Refer to guidelines on
page 2)
Servicing:
The user should not attempt to service these products. Refer all servicing to qualified service personnel.
INTERNAL
LOUDSPEAKER
Headphones
All manuals and user guides at all-guides.com
