LANDY S-HSB183072IN-MP1220, Руководство оператора

Страница: 19 / 20

18
2. Verify safety chain is installed and properly connected before transporting equipment.
3. Verify that the SMV (Slow Moving Vehicle) emblem, all lights and reflectors are clean and visible.
4. The ratio of the tractor / tow vehicle weight to the loaded equipment weight plays an important role
in defining acceptable travel speed.
5. TRAVEL SPEED - Acceptable travel speed.
6. WEIGHT RATIO - Weight of fully equipped or loaded implement(s) relative to weight of tractor / tow vehicle.
Travel Speed Weight Ratio
20 mph (32 kph) Less than 1 to 1
10 mph (16 kph) Less than 2 to 1
DO NOT TOW More than 2 to 1
6. MAINTENANCE
6.1 General safety precautions for the use and maintenance
- Comply with existing laws and regulations and the instructions given in this manual.
- Never go under an unsecured device.
- Always apply the parking brake of the base machine before performing any actions on the device.
- Only use tools that are in proper working order.
- Be careful with the pressurized hydraulic hoses and components.
- Make sure there is no pressure in the hydraulic system. Take into account the pressure accumulator.
- Make sure hydraulic fluids or greases do not leak to the ground.
- Use all necessary personal protectors.
6.2. Daily maintenance
In order to prevent further damages, it is important to inspect the device visually for possible defects. Inspect at least
the following daily:
- hydraulic hoses and components for possible leaks
- general mechanical functioning
6.3. Maintenance after first 10 hours of operation
- Lubricate, preferably with a grease or equivalent.
- Check all bolts and nuts for tightness.
6.4. Maintenance at 50-working hour intervals or on a weekly basis
- Lubricate, preferably with a grease or equivalent.
- Check the mechanical condition of the device for bends, distortions or breaches
- Check fastening bolts for tightness.