Landxcape 4151196, Руководство пользователя

Страница: 20 / 216

EN 20
This could be because your
router lost its power or
because you changed your
Wi-Fi router or network
provider.
Please reconnect Landxcape
TM
to the Wi-Fi network it has been originally paired with.
If this is not possible, contact Customer Service.
Error unknown.
Restart Landxcape
TM
. Press then . If the error message is still displayed,
contact a service agent for help.
NOTES
•
Before turning power on, always return Landxcape
TM
to its territory. If not, “ ” will be displayed. This message is also displayed when
Landxcape
TM
is sitting over the boundary wire when turned on.
• If for any reason—i.e. a party, children playing...—you want to park your Landxcape
TM
in the charging base: Press then . Landxcape
TM
will go to its charging base and stay there. Press to turn Landxcape
TM
off.
• If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary wire. Please refer to the Installation
Guide and check your set up with its help.
• If your lawn is divided in two separate areas connected by a corridor less than 1m, one of which is not provided with the charging base: when
Landxcape
TM
runs out of charge, take it manually to the charging base, the charge process will start.
• If Landxcape
TM
runs abnormally once in a while, please try to restart it. If the problem is not resolved, try to removing and reinstalling the
battery . If the problem is still not resolved, please contact a Landxcape
TM
service agent for help.
• Do not wash your Landxcape
TM
with a high pressure washer. This could cause damage to the battery or the machine.
11. Troubleshooting
If your Landxcape
TM
does not work correctly, follow the troubleshooting guide below. If the issue persists, contact your Dealer.
Symptom Cause Action
The LED light on the charging base does
not turn on.
There is no power.
Check the charging base is connected properly to the
charger and the charger is connected to a suitable
power supply.
Red light turns on the charging base. The boundary wire isn’t connected.
Check that the boundary wire has been connected
correctly to the charging base.
Check there are no breaks in the boundary wire, especially
in the wire ends.
Landxcape
TM
turns on, but the blade
disc does not move.
Landxcape
TM
is searching for the charging
base (unless you press then button to
make it go to the charging base)
This is normal. Landxcape
TM
needs to recharge, the
blade disc does not rotate while it is searching for the
charging base automatically.
Landxcape
TM
vibrates.
Blades may be damaged. Check condition of
the blade disc.
Check the blades, and replace them if damaged.
Remove debris and foreign objects from the blades
and blade disc.
Grass is being cut unevenly.
Landxcape
TM
does not work enough hours per
day.
Add more hours to the scheduled mowing time.
Mowing area is too big.
Try decreasing the size of the mowing area or adding
more hours to the mowing time.
Blades are dull.
Change all the blades and screws in order to balance
the blade disc.
The cutting height is too low for the length of
the grass.
Raise the cutting height and then gradually lower.
Grass or other object has wrapped around the
blade disc. Check the blade disc and remove the grass or other
object.
There is a build-up of grass in the blade disc or
motor frame box. Make sure the blade disc rotates easily. If need be, you
may take off the blade disc and remove the debris.
Your Landxcape
TM
is inside its territory
and the boundary wire is connected.
And “
“ is displayed.
The boundary wire ends are clamped
incorrectly.
Reverse the boundary wire ends.
The boundary wire is broken. Repair damaged boundary wire with connectors.