L&W Compressors LW 720 E Скачать руководство пользователя страница 75

Страница: 75 / 155

Page A - 73

LW 720 E
Version: 02.04.2020

S T O R A G E

Conservation / storage of the compressor

If the compressor unit is not to be used for an extended period of time, we recommend to
carry out the following work before storage time:

•

Run the compressor at 200 bar filling pressure for approximately ten minutes
(control the flow with the filling valve to maintain constant pressure).

•

Replace compressor oil, open filling valve(s) and run compressor for a few minutes.

•

Stop compressor and open drain valves (depending on the compressor type, this may hap-
pens automatically).

Remove top cap of final filter housing: clean threat, grease o-ring. and

threat with a food grade grease or silicone grease. Close filter housing.

•

Remove intake filter cartridge and undo intake pipes on all valve heads.

•

Start compressor unit. Spray a few drops of compressor oil into intake connectors.

•

Stop compressor unit and insert intake filter cartridge. Bring intake pipes back in position and
fix connections and nuts.

Close filling- and drain valves.

•

Store the compressor in a cool dry place free from dust and contamination.
A dust cover is recommended as long as condensation can be avoided.

•

If compressor unit should be stored for a period of more than one year, an oil change is
strongly recommended before it’s been re-used.

•

Fuel driven units only: fill up fuel tank to top level to avoid corrosion.

De-conservation, commissioning

After the compressor has been stored, the following steps are to be taken:

•

If compressor hasn’t been used for longer than 12 months, we strongly recommend an oil
change before any use.

•

Replace intake filter cartridge and check oil level.

•

Clean compressor unit, check for foreign objects.

Check condition and tension of V-belts, re-

place if necessary. Check condition of filling hoses, replace if necessary.

•

Secure hoses against whipping and open filling valves and run compressor for approximately
10 minutes.

•

Check condition of final filter cartridge, replace if necessary.

•

Close filling valves and run compressor up to final pressure.

•

Check safety valve relief pressure of final stage and/or pressure switch setting.

•

Check all connections and pipe work for leaks.

Once all above steps are completed, compressor unit is now ready for use.

Содержание LW 720 E




























































































































































Результаты поиска

Содержание LW 720 E

Отзывы:

Похожие инструкции для LW 720 E

Бренды по названию

Популярные бренды

L&W Compressors LW 720 E, Руководство по эксплуатации

Результаты поиска

Содержание LW 720 E

Отзывы:

Похожие инструкции для LW 720 E

Бренды по названию

Популярные бренды