Landoll L20 Series, Руководство оператора

Страница: 42 / 48

SYMPTOM PROBLEM: REMEDY
RAPID TIRE WEAR/DETERIORATION:
CENTER TREAD WEAR Over inflation: Deflate to correct inflation.
SHOULDER TREAD WEAR - BOTH SHOULDERS Under inflation: Increase inflation to correct psi.
Check axle alignment.
Overload: Loads are above rated tire capacity. Do
not load above rated tire capacity .
SHOULDER TREAD WEAR - ONE SHOULDER Axle damage: Straighten or replace axle.
Axles not parallel: Check axle alignment.
OVERALL TREAD WEAR Overloading: Check tire load rating.
High speeds: Adjust speed according to road and
load conditions.
Incorrect dual matching: Properly match dual tires
TIRE FLAT SPOTS Quick stops: Adjust braking practices.
Grabbing brakes: Adjust brakes properly.
Worn or loose wheel bearings: Adjust or replace as
needed.
Out of balance wheels and tire: Balance wheels
and tires.
UNEVEN WEAR Suspension bushings worn: Replace bushings.
Worn or loose wheel bearings: Adjust or replace as
needed.
Out of balance wheels and tires: Balance wheels
and tires.
RIM FAILURE*:
CRACKING Overinflated tires: Deflate tire to proper psi.
High speeds: Adjust speed according to road and
load conditions.
High speed cornering: Adjust cornering practices.
Over loading: Check rim load rating.
*In all instances of rim failure, replace the rim immediately!
BENDING OR WARPING Curb-hopping or potholes: Adjust turning practices
and adjust speed accordingly with road conditions.
Improper tightening sequence: Follow proper tight-
ening sequence.
BROKEN STUDS* Over-tightening: Use correct torque and tightening
sequence when mounting.
*Replace broken studs before using the semitrailer!,
TRAILER TRACKING PROBLEMS:
TRACKS TO ONE SIDE Axle alignment: Re-align axle.
TRACKS TO EITHER SIDE Broken or bent springs or equalizer bushings: Re-
place worn parts.
Axles not parallel: Adjust axle spacing to be parallel.
5-3 BRAKES (FOR TRAILERS WITH AIR BRAKES)
For maintenance procedures, see Section 4-6.
5-2