Landoll ICON 6510, Руководство по обслуживанию и запасным частям

Страница: 5 / 68

1-1
INDEX TABLE OF CONTENTS
Chapter 1
Introduction and Safety Information
Introduction
The Landoll /Icon Model 6510 Construction Disc is a quality product designed to give years of trouble free
performance. By following each section of this manual, your system will perform as designed for you and your
operation.
CHAPTER 1 Gives basic instructions on the use of this manual and understanding the safety
statements.
CHAPTER 2 Gives product specifications for the equipment. These specifications supply lengths and
measurements for your equipment. A Standard Bolt Torque Table is provided to give
guidelines for bolt torques to be used when servicing this product.
CHAPTER 3 Contains assembly instructions for your Construction Disc. When these procedures are
correctly followed, your equipment should provide you years of trouble-free operation and
service.
CHAPTER 4 Instructs how to operate your equipment before using it, and describes adjustments
needed. Gives practical advice for the care and maintenance of your Landoll equipment.
Drawings in this section locate adjustment points on the equipment.
IF YOU HAVE ANY QUESTIONS CONTACT:
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
PHONE # (785) 562-5381 or (800) 428-5655
OR
FAX # (888) 527-3909
CHAPTER 5 Contains various assemblies, subassemblies, and systems. Refer to this section of
manual when ordering Landoll/Icon replacement parts. Order parts from your
Landoll/Icon dealer.
CHAPTER 6 Is a troubleshooting guide to aid in diagnosing and solving problems with the equipment.
WARRANTY The Warranty Registration form is included with the product documents. Fill it out and
mail it within 15 days of purchase.
NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR
LANDOLL MACHINE CAN VOID YOUR WARRANTY.
COMMENTS Address comments or questions regarding this publication to:
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
ATTENTION: PUBLICATIONS - DEPT. 55