Landoll Icon 1024, Руководство по обслуживанию и запасным частям

Страница: 26 / 58

3-12 F-1024-0520
ASSEMBLY AND LUBRICATION
TABLE OF CONTENTS INDEX
Lubrication Maintenance
1. Table 3-1 specifies the number and the period of
lubrication points on the 824/1024/1224 Box Scraper.
Proper maintenance of your machine will, under
normal operating conditions, help to keep it operating
at or near its peak performance for an extended
period of time. Proper maintenance is also a
condition of keeping your warranty in good status
See Figure 3-9 .
2. When lubricating the Box Scraper, SAE
multi-purpose EP grease, or EP grease with 3-51432
molybdenum sulfide is recommended. Wipe soil from
fittings before greasing. Replace any lost or broken
fittings immediately.
3. Regular lubrication will extend service life,
particularly in severe operating conditions.
8
Storage
1. The service life of the 824/1021/1224 Box Scraper
will be extended by proper off-season storage
practices. Prior to storing the unit, complete the
following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective parts.
Replace as needed.
c. Repaint all areas where the original paint is worn
off.
d. Grease all exposed metal surfaces of shanks,
points and discs.
e. Apply a light coating of oil or grease to exposed
cylinder rods to prevent them from rusting.
f. Lubricate each point of the machine as stated in
“Lubrication Table” on page 3-14 .
2. Store the unit in a shed or under a tarpaulin to protect
it from the weather. The ground tools and tires should
rest on boards, or some other object, to keep them
out of the soil.