Landoll Brillion Turfmaker III Series, Руководство оператора

Страница: 86 / 104

4-6 1P124-2306
TABLE OF CONTENTS
Settings Menu -
Shaft Settings
Seed Shaft Settings
The Seeder can have up to six Smart Shaft Sensors that
indicate shaft rotation. Each Smart Shaft Sensor must be
set.
• Pulse per Rev: 1
• Alarm Time: 20 Sec.
Toggle between each “Shaft” by pressing icon “<” or
“>” . Select “Back” to get to the Settings Menu.
The 20 second Alarm Time is the estimated time it takes
to turn around after each pass in the field without
sounding the Alarm. This can be adjusted by the operator
if more or less time is required before the Alarm Sounds.
Ground Speed
The Seeder has one Smart Shaft Sensor located on the
Seeder Clutch Shaft that indicates ground speed. The
Smart Shaft Sensor/Ground Speed must be set.
• Pulse per Rev: 4
• Alarm Time: 20 Sec.
Toggle between each “Shaft” by pressing icon “<” or
“>” . Select “Back” to get to the Settings Menu.
Settings Menu -
Diagnostics
The Diagnostics screen can help in identifying issues with
sensors, harnessing or other items. Status reports for
Battery Voltage, Sensors Learned, MUX Communication
speed and GPS Communication speed are displayed.
Contact Loup Electronics if you need technical support.
GPS
RECEIVER SHAFT
SETTINGS
SHAFT SETTINGS
BACK
SHAFT 1
PULSE PER
REV:
1
ALARM TIME
20 SEC.
SHAFT SETTINGS
BACK
SHAFT 1
PULSE PER
REV:
4
ALARM TIME
20 SEC.
DIAGNOSTICS
MUX: PASS
DIAGNOSTICS
BACK
BATTERY VOLTAGE:
13.71 V
FIN_1:
0 Hz
L_DI_1:
OPEN
H_DI_1:
OPEN
H_AI_1: 0.17 V CURR_1: 0.0 mA0.0 PSI
H_AI_2: 0.02 V CURR_2: 0.0 mA0.0 PSI
#MUX LEARNED:
0
TEST EXTERNAL
SD: STATUS
NOR: STATUS