Landoll Brillion SS16, Руководство оператора

Страница: 50 / 100

2-32 F-1021-0422
TABLE OF CONTENTS
Scale Installation - Optional
CAUTION
WARNING
1. Secure Seeder and Seed Box.
2. Remove eight 3/4-10 x 2 Bolts and Lock Washers
from the top and bottom of Seed Box Mounts. See
Figure 2-29.
3. Raise the Seed Box, remove the Spacer Blocks.
4. Insert Load Cells with the Load Cell Cord oriented
toward the middle. See Figure 2-30.
5. Secure each Load Cell to the bottom Seed Box
Mounts with two 3/4-10 x 2 Bolts and Lock Washers
6. Carefully lower the Seed Box ensuring the cutout on
the Seed Box goes over the Load Cell Cord.
7. Secure Seed Box to each Load Cell with two 3/4-10 x
2 Bolts and Lock Washers.
Figure 2-29: Load Cell Installation - Optional
Figure 2-30: Load Cell Schematic - Optional
Do not work on or under this machine unless
securely blocked and supported by a hoist or
tractor or by other sufficient means.
Do not attempt to lift heavy parts manually. Use a
hoist or a fork lift to move these parts into
position.
Bolt,3/4-10 x 2
Lock Washer,3/4
Lock Washer,3/4
Bolt,3/4-10 x 2
Load Cell
Load Cell cable
shown shorter
than actual
Seed Box
Seed Box
Mount
SSP16 OpLoadCell
SSP16 ScaleSchematic
Load Cell
3-Port Splitter
Indicator Cord
Power Cord
GT400 Scale
Indicator
Load Cell