Landoll Bendi B40i4, Руководство по обслуживанию

Страница: 117 / 142

CALIBRATION AND PROGRAMMING
4-17
Figure 4-23: Warning Icons
Figure 4-24: Access Code Screen
4. To view vehicle fault codes, engine fault codes and to
access the service screen press and hold buttons 1
and 2 for four seconds.
5. When prompted for the access code enter 4 2 3 1.
See Figure 4-24.
6. Turn ignition “ON” and start the forklift. The display
shown below will be displayed. See Figure 4-25.
Figure 4-25: Sub Menu Screen
When a “Service Required”warning indication is given
press the “ENG FLT” button located at the bottom of the
display, See Figure 4-25. Obtain the SPN# fault
information from the display as shown, which can be
used in correlation with the Diagnostic Trouble Charts
provided on starting on page 5-12. See Figure 4-26.
Press the left button to change between “Active” and
“Inactive” engine faults.
V
Figure 4-26: Engine Fault Code Screen
All other vehicle faults require you to press the “FAULT”
button at the bottom of the display for description of the
problem. See Figure 4-27 for vehicle faults.