Landoll 9650 FC, Руководство оператора, Страница: 107 / 154

ASSEMBLY INSTRUCTIONS
3-11
Figure 3-6: Lighting and SMV Bracket Installation (Prior to August, 2013)
Lighting and SMV Bracket
Installation (Prior to August,
2013) (Non-LED Lights)
1. Attach red lamp w/ brake and reflector mount
assembly to each tail light mount using 1/4-20 x 1-1/4
hex head cap screws and hex lock nuts
See
Figures 3-5 and 3-6 . Note that the reflector mount
assembly includes the reflector mount, red reflector,
and orange stripe.
2. Install enhanced lighting module to bottom of right
tail light mount using #8-32 x 1/2 slot pan head
screws and hex nut.
3. Install left and right tail light mount assemblies to the
rear frame using 5/8-11 x 3-11/16 x 6-3/8 u-bolts and
hex lock nuts
(For placement of tail light brackets,
See Figures 2-5 .
4. Attach single amber lamp to each light mount using
1/4-20 x 1 hex head cap screws and hex lock nuts.
5. Install left and right light mount assemblies onto the
frame using 1/2-13 x 2-1/8 x 3-1/4 u-bolts and hex
lock nuts
(For placement of light brackets, See
Figures 2-5 .
6. Connect warning light harnesses to lights and
enhanced lighting module.
7. Install the SMV mounting bracket close to the center
of machine on rear frame member using 5/8-11 x
4-11/16 x 4-1/2 u-bolts and hex lock nuts so that
bracket is snug around frame member
See
Figures 3-5 .
8. Attach SMV emblem to SMV mounting bracket using
1/4-20 x 1 hex head cap screws and hex lock nuts.