Landoll 825A, Руководство оператора

Страница: 31 / 70

3-20 FRONT EXTENSION/BULKHEAD (OPTION)
3-20.1 Optional bulkheads may come with or
without chain racks. To remove a bulkhead,
simply remove the support pins holding the
bulkhead into the pockets on the semitrailer
front and lift the bulkhead off.
3-20.2 To use the front extension as an exten-
sion, remove the front-most pin from the
bracket. Lower the extension to a horizontal
position. Replace the front-most pin in its
new position. To use the extension as a
bulkhead, simply return the extension to its
original position. (See Figure 3-9).
3-20.3 In all cases, be sure to secure the sup-
port pins with the pins provided.
DANGER
TO AVOID SERIOUS INJURY, ALL RE-
MOVABLE ATTACHMENTS MUST BE
FIRMLY ATTACHED WITH FASTENERS
PROVIDED AT ALL TIMES.
3-19
Figure 3-9 Front Extension/Bulkhead