Landoll 345D, Руководство оператора

Страница: 15 / 64

OPERATING INSTRUCTIONS
3-3
Coupling of the Towing Vehicle
to the Trailer

DANGER
1. Verify the trailer wheels are chocked and brakes
function properly.
2. Make sure the towing vehicle’s coupler is open.
3. Raise or lower the pintle hitch eye to hitch height by
activating the bed tilt hydraulic lever, which is the
front most lever of the three levers.

CAUTION
4. Slowly back the towing vehicle so the hitch contacts
the trailer hitch. Make sure the hitch is centered and
will properly connect up. Set the vehicle brakes.
5. Lower pintle eye onto truck hitch by tilting bed up and
lock the hitch in place.
6. Raise the landing gear (parking stands) by first tilting
the bed up, activating the front hydraulic lever until
the landing gear is off the ground. Remove pins from
landing gear and slide landing gear fully up to stowed
position. Insert and lock pin holding landing gear in
stowed position. Fully lower bed tilt.
IMPORTANT
Keep brakes engaged for remainder of hookup,
check-out procedures, and for parking.
Connecting Towing Vehicle
Services to the Trailer
1. Connect the electrical receptacle on the front of the
trailer to the towing vehicle
(See Figure 3-1.) Insure
all lights function properly when energized by towing
vehicle electrical action.
IMPORTANT
The key on the plug and the keyway in the socket
must be properly aligned before inserting the plug
into the trailer socket.
2. It is necessary that the tractor blue wire is connected
to the appropriate electrical source on the tractor.
Keep all personnel clear of front, rear, and sides
of towing vehicle and trailer during coupling,
component operations, and uncoupling. Failure
to stay clear can result in serious personal injury
or death.
Pushing the trailer backwards can damage
parking stands.