Landoll 302D-B, Руководство оператора

Страница: 23 / 54

MAINTENANCE AND LUBRICATION
4-3
TABLE OF CONTENTS
Table 4-1: Lubrication Specifications
Maintenance Procedures
Repair Parts
Repair parts are illustrated and listed in F-1043-0619,
302D-B/305D-B Bottom Dump Parts Manual.
Replacement of parts due to wear is determined by
examination and best judgment practices. Brake wear is
provided as a general rule for replacement and may
occur before or be prolonged due to semitrailer use.
Please contact Landoll Corporation Parts Distribution
Center for any parts questions, (800) 423-4320
Tools and Equipment
Tools, equipment, and personnel normally found in a
facility capable of making truck repairs will be adequate
for maintenance of the semitrailer. No other special tools
or equipment should be necessary.
Torque Values
See Figure 2-3 for a list of torque values for standard
hardware and hydraulic fittings. They are intended as a
guide for average applications involving typical stresses
and mechanical surfaces. Values are based on the
physical limitations of clean, plated, and lubricated
hardware. In all cases, when an individual torque value is
specified, it takes priority over values given in this table.
Replace original fasteners with hardware of equal grade.
LUBE SEASON BRAND & PRODUCT (WEIGHT AND/OR TYPE)
AMOCO
EXXON
MOBIL DELVAC
ATF
MOBIL DELVAC
1
ALL YEAR
Lit-Multi-purpose
Grease
Rondex
Multi-purpose
Grease
----- -----
2
ALL YEAR
Gear Lube
SAE 80W-90
Gear Oil GX
SAE 80W-90
----- -----
3
ALL YEAR ----- ----- -----
MOBIL DELVAC
SAE-5/SAE-10
4
COLD WEATHER ----- -----
MOBIL DELVAC
SYN ATF
-----