Landoll 2220 Series, Руководство оператора

Страница: 37 / 50

3-10 SPRING CUSH ION CLAMP IN STAL LA TION
IMPORTANT
READ ALL SAFETY PRE CAU TIONS AT THE
FRONT OF THIS SEC TION BE FORE AT TEMPT -
ING ANY OF THE FOL LOW ING PRO CE DURES.
IMPORTANT
SEE FIG URE 3-12 FOR PART NAMES. SEE FIG -
URES
2-1 THROUGH 2-6 FOR SHANK
PLACEMENT.
a. For lo cat ing the shank po si tion on the
frame, re fer to the shank lo ca tion di a grams
(See Fig ures 2-1 - 2-6). Mark shank holder
lo ca tions on the frame as in di cated.
b. If us ing twisted shov els, in stall all shanks so
shov els throw soil in ward ex cept shov els near
wheels. Po si tion those shov els to throw out -
ward.
c. To en sure the chisel plow pulls evenly, in -
stall cor rect num ber of RH and LH twisted
shov els.
d. Mount shank as sem bly to frame with two
5/8" bent bolts and two 5/8" x 3-3/4" Grade 8
bolts, lock nuts and plate. Tighten to 170 ft-lb
(231 Nm)
(See Fig ures 3-12 and 3-13).
3-19
Fig ure 3-12 Spring Clamp In stal la tion Fig ure 3-13 Spring Cush ion Clamp