NSQ412 Four-Line Caller ID Telephone Owner’s Manual 35
Press the [REMOVE] key to begin delet-
ing the record. The LCD will display:
Press the [REMOVE] key again within 3-
seconds to confirm the deletion. The
LCD will display:
After approximately 5-seconds, the LCD
will return to the CID Summary screen.
Dialing a Caller ID Record
To dial a telephone number from the
Caller’s List, display the record to be
called. Press the Center of the [JOG]
knob. The telephone will go off-hook on
an available CO Line in the previous
mode (handsfree or headset) and dial
the number.
or
Pick up the handset. The telephone will
go off-hook on an available CO Line and
dial the number.
or
To select a desired CO Line and dial,
while viewing the entry, press the desired
[CO Line] key.
In all cases for example, the LCD will
display:
NOTE
: Be sure to read the section Area
Code Programming to make sure the
CID number is stored and dialed in the
correct format (7-digit, 10 digit or 11-digit
dialing). When the calling number does
not originate from any of the pro-
grammed area codes, the LCD will dial a
1 + the entire number when the calling
number is 10-digits or longer.
Storing a Caller ID Record
To save a record from the Caller’s List
into the Directory or a Speed Dial loca-
tion, display the record to be saved. For
example, the LCD will display:
Press the [RELEASE] key to quit the
Caller’s List. Press the [DIRECTORY]
key. The LCD will display:
Press the [SAVE] key to start to enter the
name. The LCD will display:
Press the [CID LIST] to copy the Caller
ID name and number from the Caller List
to the display. For example, the LCD will
display:
1 2 / 2 7 0 2 : 3 3 P
C L # 1 7 4 L 2
B O B
J O N E S
R E M O V E : r e m o v e ?
0 3 / 2 5 0 3 : 4 2 P
C L # 1 3 2 L 1
S A L L Y
P E T E R S
5 5 5 6 7 6 7
S A L L Y
P E T E R S
5 5 5 6 7 6 7
S A V E : s a v e ?
C L # 1 7 4
R e m o v e d !
1 2 3 4 5 6 7
0 0 : 0 1
C I D : 1 0 0 / 1 9 8
D I R E C T O R Y
< > : s e l e c t
P u b l i c / P r i v a t e
( E n t e r n a m e )
S A V E : s a v e ?