6
PARTS IDENTIFICATION (CONT'D)
INSTALLING YOUR REFRIGERATOR
INTERNAL FAN
This is an air-cooled unit equipped with an internal fan that maintains a consistent internal temperature.
TYPES OF INSTALLATION
This refrigerator is designed for freestanding or built-in installation. In either case, there must be adequate ventilation and access for service.
FREESTANDING INSTALLATION
A freestanding installation will allow you to install the refrigerator in almost any place you desire. You must follow the stated instructions for
electrical requirements and leveling the refrigerator.
BUILT-IN INSTALLATION
A built-in installation will allow you to install the refrigerator under a counter or in a kitchen cabinet provided the clearance space requirements
around the refrigerator are followed. It is necessary to allow adequate ventilation space around the unit (make sure there is at least some
ventilation room for the back of the unit). The following additional items must be observed:
1. Place the refrigerator in front of the installation location.
2. Adjust the feet and place the unit flat on the floor or on a platform depending on your installation requirements.
3. If the electrical outlet for the refrigerator is behind the cabinet, plug in the refrigerator.
4. Push the refrigerator into position.
The refrigerator should be installed in accordance with local electrical code requirements. It should also be placed in a location that is strong
enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty.
Before you plug the refrigerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
IMPORTANT
Warning: DO NOT install the refrigerator behind a closed cabinet door.
IMPORTANT
Do not remove any safety, warning, or product information labels from your refrigerator.
WARNING
Use two or more people to move and install the refrigerator. Failure to do so can result in back or other injury. Carefully remove the
packaging materials. Remove any shipping tape and glue from your refrigerator before using. Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator.
CARBON FILTER
This refrigerator includes a carbon filter to protect your wine and beverages from harmful odors. Replace
the carbon filter every 3 - 6 months. Contact Landmark for replacements.
