20
Sensor(s) and Fan
MODELS:
L3024UI2WSG-LH / L3024UI2WSG-RH
Checking and changing the sensor(s)
and/or fan
1. Remove the two screws from the middle display board.
2. Take out the display board support box.
3. Unplug the display board connector.
4. Take out thedisplay board box.
5. Unscrew the seven screws from the upper air duct
board cover.
6. Take out the upper air duct cover.
7. Unplug the LED light connector.
8. Unscrew five screws from the lower air duct board cover.
9. Take out the lower air duct board cover.
DISASSEMBLY