Chimney cover
1
Chimney
1
Thermometer
1
Lid for large chamber
1
Shelf bracket
Shelf board
3
Wheel support arch
Wheel axle
1
Wheel
Support cap
A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
Wire tray
1
Stand support arch
Support brace
Ventilation flap
1
Small chamber
1
Lid for small chamber
1
Handle for chamber
3
Large chamber
1
Hinge
Charcoal grid
Barbecue grid
K:
L:
M:
N:
O:
P:
Q:
R:
S:
T:
U:
List of parts
Fixing elements
Space
8x
M6x58
M6x45
M5x12
M5x25
M6x12
M6x12
4x
M6
M5
M6
6x
12x
6x
1x
16x
1x
22x
28x
2x
8x
Hinge
Assembly
Stand the large chamber (R) with the
small opening for the chimney on the
ground.
Join the support arches (G/L) together
at the short ends and hook the wire tray
(K) into the holes provided in the support
arches (G/L)
1.
.
Bolt the assembled support arches (G/L)
to the large chamber (R) using M6x5
bolts and M6 nuts so that the holes for
the wheel axle (H) are on the ground.
Now attach the support braces (M) to the
support arches (G/L) on each side with
M6x5 bolts and M6 nuts.
Turn the chamber (R) upside down and
push the wheel axles (H) through the
holes in the wheel support arches (G).
Push the wheels (I) over the ends of the
wheel axle (H) and fix them with two
split pins.
Turn the large chamber (R) upside down
again so that the large opening points
upwards. Position the small chamber
(O) on the opening and bolt them both
together using M6x1 bolts and M6
nuts.
Attach the ventilation flap (N) to the small
chamber using M6 x 1 and lock nut.
The next step is to attach the shelf
brackets (E) to the large chamber(R)
with M6x1 bolts and M6 nuts. Bolt the
shelf boards (F) to the shelf brackets (E)
with M5x1 bolts and M5 nuts
3.
.
5.
6.
.
8.
