L&L TLR04M-350-700, Руководство по установке

Страница: 7 / 16

7/8
L&L Luce&Light srl / Via Trescalini, 5 / 36031 Dueville, Vicenza / Italy / T +39 0444 36 05 71 / F +39 0444 59 43 04
E lucelight@lucelight.it / www.lucelight.it
TLR04M-350-700
FACTORY SETTING, RESET
This procedure let you take the control unit back to factory settings.
PROCEDURE :
STEP 1
Short press on the “SET” key let you
scroll through the menu until “FS” pro-
gramming appears on the display.
SHORT
PRESSURE
STEP 2
A prolonged press on the “SET” key
(approx. 3 seconds) takes you into pro-
gramming.
The LED on the receiver lights up.
LONG
PRESSURE
STEP 3
Short press on the “B” key, let you modify the setup that appears in display “b”:
display = F1 reset factory parameters, but no deletion of already programmed transmitters;
display = F2 full reset of factory parameters, even stored transmitters will be deleted.
SHORT
PRESSURE
STEP 4
To confirm, give a prolonged press on
the “SET” key (approx. 3 seconds).
The LED flashes.
LONG
PRESSURE
STEP 5
The control unit goes back to the menu
displaying the different types of pro -
gramming.
INSTALLATION INSTRUCTIONS TLR04M-350-700