Operator Manual - GRIND PRO DUAL
Landis International - 4
LOCKOUT PROCEDURES
PREPARATION
1.
Notify all affected workers that a lockout is required
and the reason for the lockout of the machine.
MACHINE OR EQUIPMENT SHUTDOWN AND ISOLATION
1.
If the equipment is operating, shut it down by
the normal stopping procedure (turn off the
switch). We recommend to install a padlock to
the Electrical control panel.
2.
Disconnect the electrical plug from the
electrical source.
APPLICATION OF LOCKOUT / TAGOUT
1.
Lock out and tag the switch with an assigned,
individual lock. A worker will not be protected
unless he/she uses his/her own padlock.
2.
If more than one worker is working on the same
piece of equipment at the same time, each one
should lock out the equipment, by placing a
personal lock and tag on the group lockout
device when he/she begins work and should
remove those devices when he/she stops
working on the machine or equipment.
3.
Locks and tags should clearly show the name of
the person who applied the device, the date,
and the reason for the lockout. This identifies
who is servicing the machinery or equipment. In
a multiple lockout/tagout situation, it will also
identify any worker(s) who may not have
finished working.
4.
Locks and tags must be durable enough to
withstand the environment in which they are to