manualshive.com logo in svg

Landis+Gyr FOCUS kWh, Техническое руководство

Поделиться
Скачать
Landis+Gyr FOCUS kWh Скачать руководство пользователя страница 25

16

 

16

 

6.

 

Configuring the Meter 

6.1.         Configuration Port 

The ability to configure the meter is provided through a secure meter configuration port.  A cover 
mounted optical configuration port accommodates meter configuration by the user.  The configuration 
port is designed to be used in a meter shop ambient environment, requiring that it function in a room 
temperature environment under room ambient lighting conditions.  The configuration port interface 
supports a read/write security function.  The configuration port can be completely disabled such that 
meter communications cannot be enabled without breaking the meter security seal.  This option is 
available for utilities that require the meter seal to be broken and cover removed to allow 
reconfiguration of the meter. 

Initial Power-Up and Operation 

KWH FOCUS

 meters are always shipped programmed in a configuration defined at the time an order 

is placed.  They are ready for field installation. 

6.1.2       Billing Data Reset/Preset 

The contents of the –kWh and +kWh accumulation registers are user programmable through an optical 
configuration port.  In its simplest form, this feature allows the user to reset the contents of the +kWh 
and –kWh accumulation registers.  This feature also enables the user to clear any accumulated energy 
following meter verification testing. 

The user also has the ability to enter initial energy values into the +kWh and –kWh accumulation 
registers.  This feature allows a user to pre-load energy values into a replacement meter before it goes 
into service. 

The user can perform this function in a meter shop 

6.1.3

 

Display Multiplier 

The user has the ability to program a display multiplier.  kWh values contained in the energy registers 
are multiplied by the display multiplier prior to being displayed in the LCD.  The display multiplier does 
not affect the contents of the internal energy registers.  If direct reading is desired on transformer rated 
installations, it can be accommodated via this programmable multiplier. 

The display multiplier multiplies the displayed energy value(s) by N for 1 

≤

 N 

≤

 240.  N is an integer 

value. 

Содержание FOCUS kWh































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды